Sign In  |  Register  |  About Walnut Creek Guide  |  Contact Us

Walnut Creek, CA
September 01, 2020 1:43pm
7-Day Forecast | Traffic
  • Search Hotels in Walnut Creek Guide

  • CHECK-IN:
  • CHECK-OUT:
  • ROOMS:

Skeena Intersects 155.76 g/t Au Over 3.22 Metres at Snip Gold Project

VANCOUVER, BC / ACCESSWIRE / May 20, 2021 / Skeena Resources Limited (TSX:SKE)(OTCQX:SKREF) ("Skeena" or the "Company") is pleased to report diamond drill core results from the 2021 Phase 3 infill and exploration drilling program at the Snip gold project ("Snip" or the "Project") located in the Golden Triangle of British Columbia. The Phase 3 program is designed to upgrade areas of existing Inferred resources from the Company's 2020 Mineral Resource Estimate (MRE), to the Measured and Indicated categories. Reference images are presented at the end of this release as well as on the Company's website.

Snip 2021 Phase 3 Drilling Highlights:

  • 155.76 g/t Au over 3.22 m (S21-076)
  • 140.50 g/t Au over 0.50 m (S21-078)
  • 8.40 g/t Au over 3.00 m (S21-080)
  • 61.30 g/t Au over 0.50 m (S21-083)

True widths range from 60-90% of reported core lengths. Length weighted Au composites are constrained by geological considerations. Grade-capping of individual assays has not been applied to the Au assays informing the length-weighted Au composites. Samples below detection limit were nulled to a value of zero.

New High-Grade Mineralization Intersected Below Twin Zone
Situated in the footwall sediments below the Twin Zone, occurrences of high tenor, vein-hosted mineralization have been intersected grading 155.76 g/t Au over 3.22 m including 376.00 g/t Au over 0.89 m and 194.00 g/t Au over 0.83 m (S21-076), and 140.50 g/t Au over 0.50 m (S21-078). These surface-based drill holes were targeting Inferred resources hosted by footwall veins that were previously only populated by widely spaced, selectively sampled historical drill holes in this area of the deposit. The new high-grade mineralization, defined by S21-076, occurs hanging-wall to the known footwall veins.

Additional footwall vein-hosted mineralization was also encountered by surface drill hole S21-080 which intersected 8.40 g/t Au over 3.00 m including 12.20 g/t Au over 1.50 m. This drill hole intersection occurs 100 m northwest S21-076 and correlates spatially with the modelled resources.

2021 Phase 3 Program Description
The 2021 drilling program at Snip is designed to convert Inferred resources from the Company's 2020 MRE to higher confidence categories (Measured and Indicated) through surface and underground drilling. Dedicated geotechnical drilling is also being completed at the Project. Approximately 3,100 m of surface-based drilling and 8,000 m of underground drilling remain to be completed in 2021. The Company is currently operating two underground rigs at Snip and additional surface rigs will be added once permits are received.

About Skeena
Skeena Resources Limited is a Canadian mining exploration company focused on revitalizing the past-producing Eskay Creek gold-silver mine located in Tahltan Territory in the Golden Triangle of northwest British Columbia, Canada. The Company released a robust Preliminary Economic Assessment in late 2019 and is currently focused on infill and exploration drilling to advance Eskay Creek to full Feasibility by Q1 2022. Additionally, Skeena continues exploration programs at the past-producing Snip gold mine.

On behalf of the Board of Directors of Skeena Resources Limited,
Walter Coles Jr.
President & CEO

Contact Information
Investor Inquiries: info@skeenaresources.com
Office Phone: +1 (604) 684-8725
Company Website: www.skeenaresources.com

Qualified Persons
Exploration activities at the Snip Project are administered on site by the Company's Exploration Managers, Raegan Markel, P.Geo. and John Tyler. In accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration and Resource Development, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting the exploration activities on its projects.

Quality Assurance - Quality Control
Once received from the drill and processed, all drill core samples are sawn in half, labelled and bagged. The remaining drill core is subsequently securely stored on site. Numbered security tags are applied to lab shipments for chain of custody requirements. The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Company's Qualified Person, Paul Geddes, P.Geo, Vice President Exploration and Resource Development.

Drill core samples are submitted to ALS Geochemistry's analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 1 kg is pulverized. Analysis for gold is by 50 g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100 ppm are re-analyzed using a 50 g fire assay fusion with gravimetric finish. Analysis for silver is by 50 g fire assay fusion with gravimetric finish with a lower limit of 5ppm and upper limit of 10,000 ppm. Samples with silver assays greater than 10,000 ppm are re-analyzed using a gravimetric silver concentrate method. A selected number of samples are also analyzed using a 48 multi-element geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and also for mercury using an aqua regia digest with Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) finish. Samples with sulfur reporting greater than 10% from the multi-element analysis are re-analyzed for total sulfur by Leco furnace and infrared spectroscopy.

Cautionary note regarding forward-looking statements
Certain statements made and information contained herein may constitute "forward looking information" and "forward looking statements" within the meaning of applicable Canadian and United States securities legislation. These statements and information are based on facts currently available to the Company and there is no assurance that actual results will meet management's expectations. Forward-looking statements and information may be identified by such terms as "anticipates", "believes", "targets", "estimates", "plans", "expects", "may", "will", "could" or "would". Forward-looking statements and information contained herein are based on certain factors and assumptions regarding, among other things, the estimation of mineral resources and reserves, the realization of resource and reserve estimates, metal prices, taxation, the estimation, timing and amount of future exploration and development, capital and operating costs, the availability of financing, the receipt of regulatory approvals, environmental risks, title disputes and other matters. While the Company considers its assumptions to be reasonable as of the date hereof, forward-looking statements and information are not guarantees of future performance and readers should not place undue importance on such statements as actual events and results may differ materially from those described herein. The Company does not undertake to update any forward-looking statements or information except as may be required by applicable securities laws.

Neither the Toronto Stock Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for the adequacy or accuracy of this release.

Table 1: Snip Project Phase II 2021 Length-Weighted Drill Hole Gold Composites:

Hole-ID
From (m)
To (m)
Core Length (m)
Au (g/t)
S21-059
 
 
 
ABANDONED
S21-060
93.19
93.96
0.77
3.15
S21-062
79.21
79.70
0.49
3.68
S21-063
68.93
70.00
1.07
3.55
S21-063
124.75
125.27
0.52
5.46
S21-066
11.40
13.75
2.35
4.42
S21-067
14.00
15.36
1.36
4.59
S21-068
9.57
10.19
0.62
9.86
S21-068
11.50
12.55
1.05
7.32
S21-071
 
 
 
ABANDONED
S21-072
 
 
 
ASSAYS PENDING
S21-073
65.50
66.99
1.49
2.09
S21-073
89.28
89.84
0.56
3.05
S21-074
77.50
78.45
0.95
4.06
S21-075
76.50
78.00
1.50
2.95
S21-075
83.25
84.45
1.20
3.62
S21-075
105.95
106.65
0.70
5.53
S21-075
111.00
112.00
1.00
13.35
S21-076
86.28
89.50
3.22
155.76
INCLUDING
86.28
87.17
0.89
376.00
AND
87.17
88.00
0.83
194.00
S21-077
 
 
 
ASSAYS PENDING
S21-078
51.56
52.80
1.24
2.97
S21-078
93.15
93.65
0.50
140.50
S21-080
13.00
13.85
0.85
3.27
S21-080
82.00
85.00
3.00
8.40
INCLUDING
83.50
85.00
1.50
12.20
S21-081
52.50
54.00
1.50
3.24
S21-083
37.00
41.00
4.00
2.75
S21-083
43.30
43.80
0.50
61.30
S21-083
74.00
79.00
5.00
4.82
S21-084
54.00
55.30
1.30
7.97
INCLUDING
54.72
55.30
0.58
15.05
S21-084
64.25
64.75
0.50
6.16
S21-085
11.00
11.75
0.75
2.09
S21-085
18.05
18.75
0.70
2.62
S21-086
 
 
 
ASSAYS PENDING
S21-087
22.69
24.16
1.47
2.71
S21-087
35.00
36.50
1.50
2.78
S21-087
40.65
41.48
0.83
11.20
S21-055
 
 
 
NSA
S21-056
 
 
 
NSA
S21-057
 
 
 
NSA
S21-058
 
 
 
NSA
S21-061
 
 
 
NSA
S21-064
 
 
 
NSA
S21-065
 
 
 
NSA
S21-069
 
 
 
NSA
S21-070
 
 
 
NSA
S21-079
 
 
 
NSA
S21-082
 
 
 
NSA

True widths range from 60-90% of reported core lengths. Length weighted Au composites are constrained by geological considerations. Grade-capping of individual assays has not been applied to the Au assays informing the length-weighted Au composites. Samples below detection limit were nulled to a value of zero. NSA - No Significant Assays.

Table 2: Mine Grid Drill Hole Locations and Orientations:

Hole-ID
Easting (m)
Northing (m)
Elevation (m)
Length (m)
Azimuth (°)
Dip (°)
S21-055
4272.7
1706.7
293.2
279.6
345.8
-65.1
S21-056
4273.9
1708.0
293.2
243.0
349.1
-53.0
S21-057
4273.6
1707.6
293.2
241.0
0.3
-50.1
S21-058
4273.8
1707.2
293.2
252.6
358.2
-56.1
S21-059
4273.6
1705.7
293.2
33.5
0.1
-65.0
S21-060
4141.1
1834.0
239.4
106.2
359.0
-65.9
S21-061
4053.8
1818.8
190.0
81.1
0.3
-50.1
S21-062
4053.8
1819.3
190.0
88.3
0.4
-68.3
S21-063
4084.6
1847.1
214.7
139.0
328.0
-76.9
S21-064
4085.0
1847.9
214.7
103.0
345.0
-56.9
S21-065
4049.3
1869.1
189.9
41.4
9.2
-51.1
S21-066
4076.7
1890.0
197.6
65.4
1.2
-55.1
S21-067
4067.9
1897.9
198.4
22.6
360.0
-51.2
S21-068
4094.5
1900.6
209.0
28.0
357.0
-51.0
S21-069
4115.4
1906.5
217.2
64.7
10.9
-45.1
S21-070
4272.8
1707.9
293.2
252.0
0.0
-64.8
S21-071
4064.9
1897.4
198.4
10.6
360.0
-51.0
S21-072
4273.8
2057.1
332.4
132.9
353.1
-64.1
S21-073
4275.4
2058.1
332.4
124.8
8.0
-52.2
S21-074
4275.5
2058.0
332.4
133.2
15.0
-60.1
S21-075
4284.8
2066.5
337.6
146.1
33.9
-53.1
S21-076
4304.4
2041.7
330.7
139.8
30.2
-50.1
S21-077
4315.4
2085.2
349.3
99.2
30.2
-56.1
S21-078
4316.5
2083.8
349.3
116.1
30.9
-70.0
S21-079
4360.7
2116.8
371.7
88.5
10.0
-45.0
S21-080
4377.4
2114.1
367.8
110.0
19.0
-58.0
S21-081
4377.7
2113.9
367.8
116.0
30.9
-50.0
S21-082
4378.1
2114.0
367.8
101.7
55.9
-57.1
S21-083
4406.8
2136.9
381.7
92.0
36.0
-59.1
S21-084
4237.1
2116.8
306.4
82.0
25.0
-57.0
S21-085
4208.0
2131.9
277.5
120.5
22.0
-53.1
S21-086
4207.8
2132.7
277.5
43.5
355.0
-47.0
S21-087
4207.1
2130.1
277.5
58.2
347.0
-66.0

 

SOURCE: Skeena Resources Limited



View source version on accesswire.com:
https://www.accesswire.com/648273/Skeena-Intersects-15576-gt-Au-Over-322-Metres-at-Snip-Gold-Project

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.
 
 
Copyright © 2010-2020 WalnutCreekGuide.com & California Media Partners, LLC. All rights reserved.