Sign In  |  Register  |  About Walnut Creek Guide  |  Contact Us

Walnut Creek, CA
September 01, 2020 1:43pm
7-Day Forecast | Traffic
  • Search Hotels in Walnut Creek Guide

  • CHECK-IN:
  • CHECK-OUT:
  • ROOMS:

New Found Intercepts 62.3 g/t Au Over 2.00m at Keats Main, Extends High-Grade Zone to 845m Down Plunge

New Found Gold Corp. (“New Found” or the “Company”) (TSX-V: NFG, NYSE-A: NFGC) is pleased to announce assay results from 21 diamond drill holes targeting expansion of the Keats Zone (“Keats”) and to test for additional high-grade gold mineralization along the Appleton Fault Zone (‘AFZ’). These holes were drilled as part of the Company’s ongoing 400,000m diamond drill program at its 100%-owned Queensway Project (“Queensway”), located on the Trans-Canada Highway 15km west of Gander, Newfoundland.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20220224005411/en/

Figure 1: Left: Photo of mineralization from NFGC-21-263 approximately 194.4m down hole depth and Right: NFGC-21-387 approximately 445.3m down hole depth. Note that these photos are not intended to be representative of gold mineralization in hole NFGC-21-263 and NFGC-21-387. (Photo: Business Wire)

Figure 1: Left: Photo of mineralization from NFGC-21-263 approximately 194.4m down hole depth and Right: NFGC-21-387 approximately 445.3m down hole depth. Note that these photos are not intended to be representative of gold mineralization in hole NFGC-21-263 and NFGC-21-387. (Photo: Business Wire)

Keats Drill Result Highlights

  • Highlight intervals from this drilling are summarized below. Additional results are provided in Table 2.

Hole No.

From (m)

To (m)

Interval (m)1

Au (g/t)

Zone

NFGC-21-263

189.70

195.25

5.55

28.16

Keats Main

Including

193.10

195.25

2.15

71.86

NFGC-21-272

152.00

155.10

3.10

43.78

Keats Main

NFGC-21-297

219.50

227.75

8.25

8.79

Keats Main

Including

219.50

224.35

4.85

14.29

NFGC-21-387

444.40

446.40

2.00

62.30

Keats Main

Table 1: Highlight results from the Keats Zone

1Note that the host structures are interpreted to be steeply dipping and true widths are generally estimated to be 60% to 95% of reported intervals. Infill veining in secondary structures with multiple orientations crosscutting the primary host structures are commonly observed in drill core which could result in additional uncertainty in true width. Intervals are calculated at a 1 g/t Au cut-off grade; grades have not been capped in the averaging.

  • The interval of 62.30 g/t Au over 2.00m in NFGC-21-387 (see Figures 2 and 3) is interpreted to occur within the Keats Main Zone (hosted in the Keats baseline fault) and is located approximately 315m down-plunge from the previous furthest down-plunge high-grade intercept of 61.5g/t Au over 5.20m in hole NFGC-21-360 (see October 14, 2021, news release). Ongoing drilling continues to test the continuity of high-grade gold mineralization in the Keats Main Zone including over this 315m interval.
  • The intercept of 8.79 g/t Au over 8.25m in NFGC-21-297 is located approximately 80m up-dip from two previously reported high-grade intervals of 21.36 g/t Au over 8.05m and 14.92 g/t Au over 12.85m in hole NFGC-21-204 (Figures 2, 3, and 4).
  • Intercepts of 28.16 g/t Au over 5.55m in NFGC-21-263 and 43.78 g/t Au over 3.10m in NFGC-21-272 further define the extent of the high-grade gold mineralization and confirm its continuity within the Keats Main Zone.
  • The Keats Main Zone remains open in all directions and exploration will continue to target the expansion of high-grade gold mineralization in this zone. Drilling at Keats will also continue to step-out on multiple additional high-grade gold intervals intercepted in additional vein sets at varying interpreted orientations including in the Keats footwall.
  • NFGC-21-144 was drilled another approximately 400m south of NFGC-21-387 in an area named the Trans-Canada Highway Zone (‘TCH’). This hole intersected a near surface fault zone containing gold-bearing quartz veins that returned intervals including 1.77 g/t Au over 3.10m and 1.72 g/t Au over 7.10m. These intervals displayed textures and mineralization typical of high-grade gold mineralization defined in other areas along this segment of the AFZ (Figure 3). Follow up drilling in this area will commence shortly.

Melissa Render, V.P. Exploration for New Found, stated: “Keats has now delivered outstanding intervals of high-grade gold over +800m of strike and to 375m of vertical depth. Drilling in the Keats baseline fault has focused on extending an interpreted thickened, south plunging dilation zone and on extension of this high-grade gold mineralization from the dilation zone to surface. To date we have completed very limited drill testing below this dilation zone. The multiple additional high-grade gold intercepts in other structures outside of the Keats baseline fault is building increasing complexity in the interpreted host vein geometry at Keats. The strike and vertical extent of the high-grade gold mineralization in these multiple vein sets is very encouraging in expanding the dimensions and envelope of the high-grade gold system at Keats.

Big picture we continue systematic exploration drilling along the AFZ, continuing step out drilling at the Golden Joint and Lotto Zones along a +2.5 km trend. In parallel we continue to add to and drill test multiple targets along +20km of total strike on the Appleton and JBP fault zones on Queensway North. The intercepts in hole NFGC-21-144 south of the Trans-Canada Highway adds one more target to be pursued in our ongoing work.”

Drillhole Details

Hole No.

From (m)

To (m)

Interval (m)1

Au (g/t)

Zone

NFGC-21-259

241.00

243.00

2.00

2.57

Keats Main

NFGC-21-263

11.40

16.30

4.90

1.34

Keats HW

And

60.10

62.10

2.00

1.13

And

179.00

181.05

2.05

1.74

Keats Main

And

189.70

195.25

5.55

28.16

Including

193.10

195.25

2.15

71.86

And

212.55

214.70

2.15

7.14

And

298.00

300.00

2.00

5.39

NFGC-21-265A

No Significant Values

Keats Main

NFGC-21-270

No Significant Values

Keats Main

NFGC-21-272

133.85

136.30

2.45

2.10

Keats Main

And

152.00

155.10

3.10

43.78

And

157.00

159.00

2.00

1.89

NFGC-21-277

141.70

144.00

2.30

2.56

Keats Main

NFGC-21-284A

291.25

295.35

4.10

2.94

Keats Main

And

304.00

307.70

3.70

2.29

And

313.55

316.50

2.95

1.21

NFGC-21-288

94.70

96.80

2.10

1.23

Keats Main

And

111.40

115.30

3.90

3.53

Including

111.40

113.55

2.15

5.48

And

126.00

128.40

2.40

1.18

And

135.25

138.00

2.75

1.42

And

149.00

152.65

3.65

1.96

Keats FW

And

155.00

157.00

2.00

1.30

NFGC-21-292

No Significant Values

Keats Main

NFGC-21-293

261.70

264.40

2.70

1.09

Keats Main

And

273.00

275.00

2.00

1.55

And

297.45

299.90

2.45

1.55

Keats FW

And

302.55

304.65

2.10

1.50

NFGC-21-297

219.50

227.75

8.25

8.79

Keats Main

Including

219.50

224.35

4.85

14.29

And

254.95

257.00

2.05

1.72

And

307.00

309.40

2.40

1.19

Keats FW

NFGC-21-298

49.00

51.00

2.00

1.06

Keats Main

NFGC-21-308

297.45

299.55

2.10

1.36

Keats Main

And

321.85

328.65

6.80

2.30

Including

321.85

325.70

3.85

3.40

And

331.40

335.00

3.60

2.52

NFGC-21-324

96.20

99.45

3.25

2.14

Keats Main

And

103.00

105.00

2.00

1.34

And

115.70

119.20

3.50

2.48

Including

115.70

117.90

2.20

3.35

NFGC-21-336

315.70

317.90

2.20

1.16

Keats Main

NFGC-21-339

151.60

155.00

3.40

1.51

Keats HW

NFGC-21-345

103.05

106.00

2.95

1.01

Keats HW

And

177.95

180.05

2.10

1.23

Keats Main

NFGC-21-378

84.80

87.00

2.20

1.68

Keats Main

And

143.00

145.60

2.60

1.46

And

211.00

213.45

2.45

1.24

Keats FW

NFGC-21-387

444.40

446.40

2.00

62.30

Keats Main

Table 2: Summary of results reported in this release for Keats Zone

1Note that the host structures are interpreted to be steeply dipping and true widths are generally estimated to be 60% to 95% of reported intervals. Infill veining in secondary structures with multiple orientations crosscutting the primary host structures are commonly observed in drill core which could result in additional variability in true width. Intervals are calculated at a 1 g/t Au cut-off grade; grades have not been capped in the averaging.

Hole No.

From (m)

To (m)

Interval (m)*

Au (g/t)

Zone

NFGC-21-138

NSV

TCH

NFGC-21-144

7.50

10.60

3.10

1.77

TCH

And

44.70

51.80

7.10

1.72

Including

44.70

47.00

2.30

3.65

Table 3: Summary of results reported in this release for TCH

1Note orientations of the mineralized intervals have insufficient information at this time to determine a true width. Intervals are calculated at a 1 g/t Au cut-off grade; grades have not been capped in the averaging

Hole No.

Azimuth (°)

Dip (°)

Length (m)

UTM E

UTM N

NFGC-21-138

300

-45

234

657632

5426646

NFGC-21-144

120

-45

215

657633

5426643

NFGC-21-259

117

-72

341

657930

5427271

NFGC-21-263

118

-72

334

657952

5427310

NFGC-21-265A

117

-78

341

657929

5427271

NFGC-21-270

118

-49

419

657749

5427325

NFGC-21-272

299

-46

227

658187

5427380

NFGC-21-277

299

-46

248

658176

5427386

NFGC-21-284A

299

-45

395

658125

5427200

NFGC-21-288

300

-45

213

658270

5427477

NFGC-21-292

299

-46

254

658331

5427456

NFGC-21-293

300

-45

371

658103

5427212

NFGC-21-297

300

-45

377

658126

5427228

NFGC-21-298

299

-46

170

658080

5427370

NFGC-21-308

299

-46

365

658134

5427165

NFGC-21-324

299

-46

230

658067

5427348

NFGC-21-336

299

-46

353

658087

5427136

NFGC-21-339

299

-46

416

658074

5427114

NFGC-21-345

300

-45

299

658017

5427263

NFGC-21-378

300

-45

330

657982

5427254

NFGC-21-387

299

-46

635

657936

5426877

Table 4: Details of drill holes reported in this release

Queensway 400,000m Drill Program Update

Approximately 35% of the planned 400,000m program at Queensway has been drilled to date with approximately 28,500m of the core with pending assay results. Ten core rigs are currently operating and New Found is targeting an increase in the drill count to 14 rigs by the end of Q1 2022.

Sampling, Sub-sampling, Laboratory and Discussion

True widths of the intercepts reported in this press release have yet to be determined but are estimated to be 60% to 95% of reported core lengths. Infill veining in secondary structures with multiple orientations crosscutting the primary host structures are commonly observed in drill core which could result in additional variability in true width. Assays are uncut, and calculated intervals are reported over a minimum length of 2 meters using a lower cut-off of 1.0 g/t Au. All HQ split core assays reported were obtained by either complete sample metallic screen/fire assay or standard 30-gram fire-assaying with ICP finish at ALS Minerals in Vancouver, British Columbia, or by entire sample screened metallic screen fire assay at Eastern Analytical in Springdale, Newfoundland. The complete sample metallic screen assay method is selected by the geologist when samples contain coarse gold or any samples displaying gold initial fire assay values greater than 1.0 g/t Au. Drill program design, Quality Assurance/Quality Control and interpretation of results is performed by qualified persons employing a Quality Assurance/Quality Control program consistent with National Instrument 43-101 and industry best practices. Standards and blanks are included with every 20 samples for Quality Assurance/Quality Control purposes by the Company as well as the lab. Approximately 3% of sample pulps are sent to secondary laboratories for check assays.

Qualified Person

The technical content disclosed in this press release was reviewed and approved by Greg Matheson, P. Geo., Chief Operating Officer, and a Qualified Person as defined under National Instrument 43-101. Mr. Matheson consents to the publication of this news release dated February 24, 2022, by New Found. Mr. Matheson certifies that this news release fairly and accurately represents the information for which he is responsible.

About New Found Gold Corp.

New Found holds a 100% interest in the Queensway Project, located 15km west of Gander, Newfoundland, and just 18km from Gander International Airport. The project is intersected by the Trans-Canada Highway and has logging roads crosscutting the project, high voltage electric power lines running through the project area, and easy access to a highly skilled workforce. The Company is currently undertaking a 400,000m drill program at Queensway, now approximately 35% complete. The Company is well funded for this program with a current working capital balance of approximately $118million.

Please see the Company’s website at www.newfoundgold.ca and the Company’s SEDAR profile at www.sedar.com.

Acknowledgements

New Found acknowledges the financial support of the Junior Exploration Assistance Program, Department of Natural Resources, Government of Newfoundland and Labrador.

Contact

To contact the Company, please visit the Company’s website, www.newfoundgold.ca and make your request through our investor inquiry form. Our management has a pledge to be in touch with any investor inquiries within 24 hours.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Statement Cautions

This press release contains certain "forward-looking statements" within the meaning of Canadian securities legislation, relating to assay results, exploration and drilling on the Company’s Queensway gold project in Newfoundland, interpretation of the assay results and the results of the drilling program, the discovery of zones of high-grade gold mineralization, follow-up step-out drilling and funding of the drilling program. Although the Company believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct. Forward-looking statements are statements that are not historical facts; they are generally, but not always, identified by the words "expects," "plans," "anticipates," "believes," "intends," "estimates," "projects," "aims," “suggests,” "potential," "goal," "objective," "prospective," “possibly,” and similar expressions, or that events or conditions "will," "would," "may," "can," "could" or "should" occur, or are those statements, which, by their nature, refer to future events. The Company cautions that forward-looking statements are based on the beliefs, estimates and opinions of the Company's management on the date the statements are made, and they involve a number of risks and uncertainties. Consequently, there can be no assurances that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Except to the extent required by applicable securities laws and the policies of the TSX Venture Exchange, the Company undertakes no obligation to update these forward-looking statements if management's beliefs, estimates or opinions, or other factors, should change. Factors that could cause future results to differ materially from those anticipated in these forward-looking statements include risks associated with possible accidents and other risks associated with mineral exploration operations, the risk that the Company will encounter unanticipated geological factors, risks associated with the interpretation of assay results and the drilling program, the possibility that the Company may not be able to secure permitting and other governmental clearances necessary to carry out the Company's exploration plans, the risk that the Company will not be able to raise sufficient funds to carry out its business plans, and the risk of political uncertainties and regulatory or legal changes that might interfere with the Company's business and prospects. The reader is urged to refer to the Company's Annual Information Form and Management’s discussion and Analysis, publicly available through the Canadian Securities Administrators' System for Electronic Document Analysis and Retrieval (SEDAR) at www.sedar.com for a more complete discussion of such risk factors and their potential effects.

Contacts

New Found Gold Corp.

Per: "Craig Roberts"

Craig Roberts, P.Eng., Chief Executive Officer

Email: croberts@newfoundgold.ca

Phone: +1 (845) 535-1486

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.
 
 
Copyright © 2010-2020 WalnutCreekGuide.com & California Media Partners, LLC. All rights reserved.